You just broke your Apple Watch screen and you want to save some cash rather than sending your device to Apple or a repair center.

In our recent post, we explained Apple screen repair and replacement. In this article, we will introduce you to Apple screen repair kits for your Apple Watch and how to fix it.

Table of Content
[Open][Close]

Apple is known for discouraging its customers from self-repairing. But recently, Apple took broke the internet lately announcing that they’re starting a self-repair service soon. Read post: Apple Self Repair Service for its Customers

Fixing your Apple watch could be easy when you have the right knowledge and tools. before going through the process, let’s take a look at the necessary precautions.

Safety Precautions to take when replacing your Apple Watch Screen

  1. Backup your Apple watch to avoid loss of data and power off your device before opening.
  2. Wear Protective Eye wears and gloves to protect your fingers when removing the screen.
  3. Do not apply too much pressure when fixing the screen to avoid cuts or damage to the device.

Apple Watch Screen Kits

  1. Heat gun: this is a heating device used on the watch to lose up the adhesive before pulling up the screen.
  2. Screw driver: this tool is used to remove the screws securing metal cover plates in Apple devices.
  3. Razor blade: this is used for sliding between the device.
  4. Tweezers: this is used to pick up tiny glasses and the screen ribbon cables underneath the latch.
  5. Prying tool (preferably plastic): this tool is used for sliding and picking

How to Repair your Apple Watch Screen

  1. Power off the watch. If the touch is not working, hold down the side button and digital crown until the watch is powered off.
  2. Heat the device. Using the heat gun to heat the watch until it’s too hot to touch.
  3. Open up the device. Take your razor blade and slide it between the metal frame of the watch and the screen, make sure not to go too deep inside the device and do not apply too much pressure in the process. The moment is opening, insert the prying tool and slide it between the glass and the metal frame. Use a pair of tweezers to peel off the latch covering the display cable connectors. Remove the screen ribbon cables underneath the latch with the use of the prying tool.

Conclusion

Fixing a broken Apple watch screen can be challenging, but with proper tools, it is possible. However, it is important to note that self-repairing your Apple watch may void its warranty, so it is advisable to consult Apple or a certified repair center before attempting any repairs.