You must have caught your MacBook Pro running slow n number of times or noticed it freezing quite often. There could have been times where you heard weird noises coming out of your MacBook Pro but, could do nothing. One thought that sharply strikes your head after all this mess is either get a new MacBook Pro or send it to a mobile computer repair in Toronto. However, before pondering over both these situations, you should try it yourself and look to see if it’s time to replace your hard drive with an SSD. For once if there comes a problem with your hard drive, you can fix it through a few easy steps.

Mid Level Repair

But first, it is essential for you to know how you can take advantage of learning to replace a MacBook Pro hard drive. We all know hard drives are for saving an important piece of information and the storage options they offer are highly based on forces like movement and magnetism. These forces work in a way that they make the part of a hard drive spin and produce code so, your information is kept safe. Usually, the moving parts of the hard drive fail and most of you consider to install a new drive but, any mac computer repair in Toronto would suggest you consider an SSD for a real-time investment.

Signs It’s Time to Upgrade to an SSD

  • The folders on your computer are not initiating
  • The files have started disappearing
  • Your MacBook Pro has been running slow
  • The laptop has started freezing frequently
  • The files have started getting corrupted even saving without errors
  • The drive has started making strange noises as if it’s trying to haunt

Things Needed to Replace a MacBook Pro Hard Drive With an SSD

  • An SSD
  • A Torx head screwdriver
  • A SATA-to-USB cable or dock
  • A tiny Phillips screwdriver

The Procedure Explained

  • The first step is to connect your SSD to MacBook Pro with the help of SATA-to-USB cable.
  • Then select Disk Utility from the Applications Folder.
  • Choose the SSD option and click on Partition.
  • Now, select the box Options present at the bottom of the menu.
  • After that, select the GUID Partition Table.
  • Validate Disk Permissions by ticking on the First Aid Tab.
  • Choose Repair Disk Permissions.
  • First, select Verify Disk and then Repair Disk.
  • Close down your MacBook Pro, then restart it by pressing the Option Key, and choosing the boot option from Recovery Disk.
  • Then, go to Reinstall Mac OS.
  • Select the SSD as the destination disk.
  • Once the OS has installed, select the option Hard Drive as soon as the system asks you to restore files from another disk.
  • Now, this will take a pretty long to get installed, meanwhile, you can spend your time doing anything.

What’s Next?

  • Put your MacBook Pro upside down on a static-free mat.
  • Using a screwdriver, remove all the ten screws attached to it.
  • After that, smoothly displace the bottom of the MacBook Pro.
  • Once you have removed the bottom you will notice the hard drive, held in by plastic.
  • Eliminate the screws attached to that plastic piece and gently take off the hard drive.
  • While removing the hard drive, you will notice a SATA ribbon attached in the end, instead of wiggling it wiggle the connector to disconnect the drive.

Installing the SSD and Finishing It Up

  • Pin the Torx screws that you had removed earlier from the hard drive.
  • Now, gently attach the SATA ribbon to the SSD.
  • The next step is to place SSD in the MacBook Pro.
  • Once the SSD has been placed, reattach the plastic piece that holds the drive.

In the end, finish it up by screwing up the back of the bottom. These steps should only be completed by a competent technician. If you don’t feel comfortable doing this steps, call a technician instead of doing it yourself.

HP/Samsung SM863 Series (MZ-7KM1T90) 1.92TB 2.5-inch 7mm SATA III MLC (6.0Gb/s) Internal Solid State Drive (SSD) (HPE Model : MK1920GFDKU | P/N: 816962-005) – New 5 Years Warranty