Connecting your Shark Robot Vacuum to a new Wi-Fi network can be simple if you follow the proper instructions. This guide will bring you through the procedure step by step, for both iOS and Android devices. Let’s dive in. We’ll also go over some typical troubleshooting techniques to help you connect smoothly. How to connect Shark Robot Vaccum to new Wifi step-by-step

Steps to connect Shark Robot Vaccum to new Wifi on Android Phone 

Connecting your Shark Robot Vacuum to a new Wi-Fi network with an Android phone is straightforward. Here’s a step-by-step guide:

  1. Download the Shark Clean App: Go to the Google Play Store and search for “Shark Clean,” then download it to your Android device.
  2. Launch the app and create an account by entering your email address and selecting a strong password.
  3. Activate the Robot’s Wi-Fi: Make sure your robot is on. Hold the ‘Dock and Clean’ or ‘Dock and MAX’ buttons for 5-10 seconds on Shark ION models. The Wi-Fi indicator will begin blinking.
  4. Select your robot: Exit the app temporarily and navigate to your device’s Wi-Fi settings. Find your Shark Robot model in the list and connect to it.
  5. Connect to Wi-Fi: Launch the Shark Clean app again, pick your Wi-Fi network, and input your password. If you have various bands, make sure you connect to the 2.4 GHz network. A success screen will appear, and the robot’s Wi-Fi icon will turn solid blue to indicate a successful connection.

Related: Redroad G10 Self-Cleaning Robot Vacuum and Mop Review 2023.

How to Connect Shark Robot Vacuum to New Wi-Fi on iPhone

For iOS users, connecting your Shark Robot to a new Wi-Fi network is likewise simple. Take these steps:

  1. Download the Shark Clean App: Go to the App Store and search for “Shark Clean,” then install the app on your iPhone.
  2. Create an account: Open the app and create an account by entering your email address and selecting a strong password.
  3. Activate the Robot’s Wi-Fi: Make sure your robot is powered on. Hold the ‘Dock and Clean’ or ‘Dock and MAX’ buttons for 5-10 seconds on Shark ION models. The Wi-Fi indicator will begin blinking.
  4. Select your robot: Temporarily leave the app and navigate to your iPhone’s Wi-Fi settings. Find and select your Shark Robot model from the list.
  5. Connect to Wi-Fi: Return to the Shark Clean app, choose your Wi-Fi network, and input the password. If you have multiple networks, make sure to select the 2.4 GHz one. Once connected, the robot’s Wi-Fi icon will turn solid blue.

See Also: 8 Best Robot Vacuum Home Tech Gadget

Troubleshooting Shark Robot Vacuum WiFi Connections

Even with the appropriate steps, things don’t always proceed as planned. Here are some troubleshooting suggestions to help you out:

  1. Reset Your Shark Robot’s Wi-Fi Connection: To reset your Shark Robot’s Wi-Fi connection, first turn off and disconnect your vacuum. Turn off your Wi-Fi router and unplug it. Wait 1-2 minutes before plugging in and turning on the router. Turn on your Shark Robot vacuum once the router has finished booting up.
  2. Check Wi-Fi Signal Strength and Bandwidth: Check the Wi-Fi signal strength and bandwidth: Place the Shark Robot vacuum near the Wi-Fi router. Check the Wi-Fi signal strength on your phone or computer. If the signal is weak, position the vacuum closer to the router. Make sure other devices are using only a little bandwidth.
  3. Update the Shark Robot’s Software: Launch the Shark Clean app on your phone. Tap “Settings,” then scroll down to “Firmware Update,” and follow the prompts to download and install any available updates.
  4. Verify network security settings: Use a computer to access the settings for your Wi-Fi router. Check if your network’s security protocol is set to WPA2 or WPA3. To improve security, switch from WEP to WPA2 or WPA3.
  5. Reset Your Shark Robot Vacuum: To reset your Shark Robot vacuum, first turn it off and unplug it. Press and hold the Dock and Max buttons for ten seconds. When the power light flashes, release the buttons. Wait 1-2 minutes, then turn on the Shark Robot vacuum.

Related: The Best Smart Home Tech at CES 2024

Frequently Asked Questions 

How do I connect Shark Robot Vaccum to the new Wifi?

To connect your Shark Robot Vacuum to a new Wi-Fi network, first install the Shark Clean app from your device’s app store. To activate the robot’s Wi-Fi, open the app, create an account, and follow the on-screen instructions. Hold the ‘Dock and Clean’ or ‘Dock and MAX’ buttons for 5-10 seconds. Then, navigate to your device’s Wi-Fi settings, choose your Shark Robot model, and then return to the app to select your Wi-Fi network and input your password. Make sure you’re connected to a 2.4GHz network.

What should I do if Shark Robot is not connecting to Wifi?

If your Shark Robot is not connecting to Wi-Fi, try resetting the connection. Turn off and unplug your vacuum and Wi-Fi router, then reconnect and power them on. Place the vacuum near the router and verify the Wi-Fi signal strength. Also, ensure that your network uses WPA2 or WPA3 security protocols. If these instructions do not work, try updating the firmware using the Shark Clean app.

What is the best wifi bandwidth for Shark Robot?

The 2.4 GHz network provides the optimal Wi-Fi bandwidth for your Shark Robot. This frequency has a longer range and penetrates better through walls, resulting in a more dependable connection for your robot vacuum.

Conclusions 

In conclusion, connecting your Shark Robot Vacuum to a new Wi-Fi network is a simple process that can be done using the Shark Clean app on both Android and iOS devices. By following the step-by-step instructions provided, you can easily connect your vacuum to the new Wi-Fi network and ensure a successful connection. Additionally, troubleshooting techniques are provided to help address any potential issues that may arise during the process.